ADENSYS strives to be the highest quality after-market manufacturer for dental parts worldwide. This means delivering products that have consistently high performance and consistently long life in service.

Technical Properties

Although we fulfill all of the ISO-stipulated requirements listed above, we go above and beyond whenever possible. Specifically, this means that our cartridge products have technical properties that match or exceed the properties you’d find from the original equipment manufacturer.

High Retention Force – ensures safety for patients and long spindle lifetime
[row ] [col span=“2/3″ ] Force required to extract the bur from the chuck
[/col] [col span=“1/3″ ] >30N
[/col] [/row]

Low Thumb Force – makes for easy operation
[row ] [col span=“2/3″ ] Force required to open the chuck mechanism using the push button
[/col] [col span=“1/3″ ] 25N – 30N
[/col] [/row]

High Part Hardness – increase bearing and chuck lifetime
[row ] [col span=“2/3″ ] The hardness of all parts including axis, on which the bearings are mounted
[/col] [col span=“1/3″ ] 60-65 HRC
[/col] [/row]

Low Bur Runout – increases bearing lifetime and improves precision operation of handpiece
[row ] [col span=“2/3″ ] The radial deviation of a bur, from completely concentric, when turned measured 6cm from the end of the rotor‘s axis part
[/col] [col span=“1/3″ ] < 0.015mm
[/col] [/row]

Low Imbalance – reduced handpiece noise and increase rotor lifetime
[row ] [col span=“2/3″ ] The amount of rotor imbalance , expressed as a mass at a certain distance from the center of rotation
[/col] [col span=“1/3″ ] < 0.2mgmm
[/col] [/row]

Traceability Through Serial Number

All rotor products are delivered with a unique serial number (at the front of the spindle), which allows for smoother management of guarantee claims and allows for full traceability if any quality issues arise in the market. Measured technical properties for each rotor are recorded and archived by ADENSYS.

ISO Compliance

In order to fulfill the vision spelled out in our quality philosophy, we have to ensure that we deliver the top technical characteristics for all ADENSYS products. In the case of our rotor assemblies, this means that absolutely all requirements of globally recognized standards are respected. Our rotors fulfill the requirements for the following ISO norms:
[row ] [col span=“1/6″ ] ISO 7785-1 & 7785-2
[/col] [col span=“5/6″ ] Technical Requirements for air- and motor-driven dental handpieces
[/col] [/row] [row ] [col span=“1/6″ ] ISO 1797
[/col] [col span=“5/6″ ] Specifications for the burs and mandrels that are used with dental handpieces
[/col] [/row] [row ] [col span=“1/6″ ] ISO 9687
[/col] [col span=“5/6″ ] Description of the graphical symbols to be used for dental equipment
[/col] [/row] [row ] [col span=“1/6″ ] ISO 13060
[/col] [col span=“5/6″ ] Process description for sterilization of medical devices
[/col] [/row] [row ] [col span=“1/6″ ] ISO 14457
[/col] [col span=“5/6″ ] The norm for dental hand pieces and motors, which replaced ISO 7785 and ISO 13294
[/col] [/row]

Guarantee

All ADENSYS products come with a guarantee against material defects and workmanship. Cartridges are covered by a 6 month guarantee*, combos are covered by a 12 month guarantee and all spare parts are covered by a 4 month guarantee.

In order to claim guarantees, we require that the defective/damaged parts be returned to us with a copy of the original invoice. Please note that this guarantee will not cover any claims that results from misuse, improper assembly, improper maintenance, as per the instructions issued by the original equipment manufacturer. For more information on our guarantee policy, please our terms and conditions.

* Cartridge guarantee times are generally lower because of the possibility for improper handpiece maintenance.